Frequently Asked Questions
How much will a Hot Tub cost to run?
Less than 80 pence per day.
How much will the cleaning chemicals cost per month?
Less than £5 per month.
What electrical supply is required?
16 Amp or 30 Amp depending on the model of the spa.
See the hot tub specification sheet which gives the pools amperage.
Can I install the electrical supply myself?
No. A registered electrician will need to visit and install a circuit breaker (fuse) in your electrical consumer unit, run a cable to near your spa.
What is the weight of a Hot Tub empty?
Less than 260 kg. On average
What is the weight of a Hot Tub full?
Less than 1300 kg for the 1000 ltr capacity models and less than 1800 kg for the 1500 ltr larger hot tubs.
What distributed load is required when I build a patio or deck?
Min. 320 kg/m2 (66 lb/sq.ft) for the smaller 1000 ltr pools and Min. 450 kg/m2 (92 lb/sq.ft) for the larger 1500 ltr hot tubs
Will the hot tub fit through a door?
It depends; the smaller models may. See the brochure for exact overall dimensions or book a site survey
I do not have a garden access; or my gate is very narrow! How do I get the pool into my rear garden?
Crane installs are very quick and safe and take approximately 15 minutes.
Do I need to have water connected all the time?
No. Just fill form a garden hose and top up as required. We recommend to change the water every 3 months or sooner as you like.
Can I install my hot tub in a conservatory or pool closure?
Yes. Please call our sales line for more information and advice.
Can I use the spa immediately after I apply the first dose of chemicals?
No. You must wait for 12 hrs after first applying the chlorine. It will need this time to heat–up from cold anyway.
What maintenance is required and how long does it take?
20 Minutes a week to check water condition and add chemicals as required.10 Minutes a month to clean the filters. 2 hours every 3 months to empty and refill the pool.
How long does the filter last?
This is dependent on usage of the spa approx 12 months.

